Saturate gas plants
Saturate (sat) gas plants in petroleum refining separate refinery gas components including butanes for alkylation, pentanes for gasoline blending, LPG's for fuel, and ethane for petrochemicals. Because sat gas processes depend on the feedstock and product demand, each refinery uses different systems, usually absorption-fractionation or straight fractionation. In absorption-fractionation, gases and liquids from various refinery units are fed to an absorber-deethanizer where C2 and lighter fractions are separated from heavier fractions by lean oil absorption and removed for use as fuel gas or petrochemical feed. The heavier fractions are stripped and sent to a debutanizer, and the lean oil is recycled back to the absorber-deethanizer. C3/C4 is separated from pentanes in the debutanizer, scrubbed to remove hydrogen sulfide, and fed to a splitter where propane and butane are separated. In fractionation sat gas plants, the absorption stage is eliminated.
| Disclaimer: This article contains information that was originally published by the Occupational Safety & Health Administration (OSHA). Topic editors and authors for the Encyclopedia of Earth may have edited its content or added new information. The use of information from the Occupational Safety & Health Administration (OSHA) should not be construed as support for or endorsement by that organization for any new information added by EoE personnel, or for any editing of the original content. |
