DRYIT Semi-Continuous Tray Drier
Practical Action
Construction
1. Make the doorframes from a single length of MS angle cut and bend, as shown in figure
23, or discrete lengths, welded together.
Figure 23: Bent mitre
2. Weld or bolt hinges, handles and latches to each door in the positions given in TD012
and TD013
Where suitable hinges and latches are not locally available they can be fabricated to the
design shown in figure 24.
Hinge
16 gauge MS
plate – bend
around nail in
vice
Pad – weld to
door frame
Pin – attach to
pad
Tongue –
weld to
cabinet Latch
Figure 24: Hinges and latches
24