27. THE COILS MUST ALL BE THE SAME WAY UP
RIGHT
WAY UP
WRONG
WAY UP
STARTING TAIL
HIDDEN UNDER
• Scrape the enamel off the last 20mm of each tail of enamelled wire, until it is all
bright copper. (A hacksaw blade makes a very good scraper, when the edge has
been sharpened with a grinder.)
• Solder on tails of flexible wire (diagram 28).
28. SOLDERING ON TAILS OF FLEX
SOLDER
JOINTS
FLEXIBLE WIRE
MASKING
TAPE
1
100mm
1B 1A
PMG manual
page 26
June 2001