Electric Potential in a Uniform Electric Field
The video we just watched on electrostatic potential also makes use of an important property that electrical conductors show as relates to the electric potential: in equilibrium, the electric potential is the same everywhere along the surface of a conductor. This is closely connected to the observation that electric field lines are perpendicular to the conducting surface. Both of these facts come together in the discussion of the parallel-plate configuration in the next section.
In the previous section, we explored the relationship between voltage and energy. In this section, we will explore the relationship between voltage and electric field. For example, a uniform electric field is produced by placing a potential difference
(or voltage)
across two parallel metal plates, labeled A and B. (See Figure 19.5.)
Examining this will tell us what voltage is needed to produce a certain electric field strength; it will also reveal a more fundamental relationship between electric potential and electric field. From a physicist’s point of view, either or
can be used to describe any charge distribution.
is most closely tied to energy, whereas
is most closely related to force.
is a scalar quantity and has no direction, while
is a vector quantity, having both
magnitude and direction. (Note that the magnitude of the electric field strength, a scalar quantity, is represented by
below.)
The relationship between and
is revealed by calculating the work done by the force in moving a charge from point A to point B. But, as noted in Electric Potential Energy: Potential Difference, this is complex for arbitrary
charge distributions, requiring calculus. We therefore look at a uniform electric field as an interesting special case.
Figure 19.5 The relationship between and
for parallel conducting plates is
. (Note that
in magnitude. For a charge that is moved from plate A at higher potential to plate B at lower potential, a minus sign
needs to be included as follows:
. See the text for details.)
The work done by the electric field in Figure 19.5 to move a positive charge from A, the positive plate, higher potential, to B, the negative plate, lower potential, is
The potential difference between points A and B is
Entering this into the expression for work yields
Work is ; here
, since the path is parallel to the field, and so
. Since
, we see that
. Substituting this expression for work into the previous equation gives
The charge cancels, and so the voltage between points A and B is seen to be
(uniform E-field only) [equation 19.25]
where is the distance from A to B, or the distance between the plates in Figure 19.5. Note that the above equation implies the units for electric field are volts per meter. We already know the units for electric field are newtons
per coulomb; thus the following relation among units is valid:
Example 19.4 What Is the Highest Voltage Possible between Two Plates?
Dry air will support a maximum electric field strength of about . Above that value, the field creates enough ionization in the air to make the air a conductor. This allows a discharge or spark that reduces the field. What,
then, is the maximum voltage between two parallel conducting plates separated by 2.5 cm of dry air?
Strategy
We are given the maximum electric field between the plates and the distance
between them. The equation
can thus be used to calculate the maximum voltage.
Solution
The potential difference or voltage between the plates is
Entering the given values for and
gives
or
(The answer is quoted to only two digits, since the maximum field strength is approximate.)
Discussion
One of the implications of this result is that it takes about 75 kV to make a spark jump across a 2.5 cm (1 in.) gap, or 150 kV for a 5 cm spark. This limits the voltages that can exist between conductors, perhaps on a power transmission line. A smaller voltage will cause a spark if there are points on the surface, since points create greater fields than smooth surfaces. Humid air breaks down at a lower field strength, meaning that a smaller voltage will make a spark jump through humid air. The largest voltages can be built up, say with static electricity, on dry days.
Figure 19.6 A spark chamber is used to trace the paths of high-energy particles. Ionization created by the particles as they pass through the gas between the plates allows a spark to jump. The sparks are perpendicular to the plates, following electric field lines between them. The potential difference between adjacent plates is not high enough to cause sparks without the ionization produced by particles from accelerator experiments (or cosmic rays). (credit: Daderot, Wikimedia Commons)
Example 19.5 Field and Force inside an Electron Gun
(a) An electron gun has parallel plates separated by 4.00 cm and gives electrons 25.0 keV of energy. What is the electric field strength between the plates? (b) What force would this field exert on a piece of plastic with a 0.500 μC charge that gets between the plates?
Strategy
Since the voltage and plate separation are given, the electric field strength can be calculated directly from the expression . Once the electric field strength is known, the force on a charge is found using
. Since the
electric field is in only one direction, we can write this equation in terms of the magnitudes,
.
Solution for (a)
The expression for the magnitude of the electric field between two uniform metal plates is
Since the electron is a single charge and is given 25.0 keV of energy, the potential difference must be 25.0 kV. Entering this value for and the plate separation of 0.0400 m, we obtain
Solution for (b)
The magnitude of the force on a charge in an electric field is obtained from the equation
Substituting known values gives
Discussion
Note that the units are newtons, since . The force on the charge is the same no matter where the charge is located between the plates. This is because the electric field is uniform between the plates.
In more general situations, regardless of whether the electric field is uniform, it points in the direction of decreasing potential, because the force on a positive charge is in the direction of and also in the direction of lower potential
.
Furthermore, the magnitude of
equals the rate of decrease of
with distance. The faster
decreases over distance, the greater the electric field. In equation form, the general relationship between voltage and electric field
is
where is the distance over which the change in potential,
, takes place. The minus sign tells us that
points in the direction of decreasing potential. The electric field is said to be the gradient (as
in grade or slope) of the electric potential.
Relationship Between Voltage and Electric Field
In equation form, the general relationship between voltage and electric field is
where is the distance over which the change in potential,
, takes place. The minus sign tells us that
points in the direction of decreasing potential. The electric field is said to be the gradient (as
in grade or slope) of the electric potential.
For continually changing potentials, and
become infinitesimals and differential calculus must be employed to determine the electric field.
Source: Rice University, https://openstax.org/books/college-physics/pages/19-2-electric-potential-in-a-uniform-electric-field
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 License.