OK.
Shall we start?
This is the second lecture on eigenvalues.
So the first lecture was --
reached the key equation, A x equal lambda x.
x is the eigenvector and lambda's the eigenvalue.
Now to use that.
And the, the good way to, after we've found --
so, so job one is to find the eigenvalues
and find the eigenvectors.
Now after we've found them, what do we do with them?
Well, the good way to see that is diagonalize the matrix.
So the matrix is A.
And I want to show -- first of all,
this is like the basic fact.
This, this formula.
That's, that's the key to today's lecture.
This matrix A, I put its eigenvectors
in the columns of a matrix S.
So S will be the eigenvector matrix.
And I want to look at this magic combination S inverse A S.
So can I show you how that --
what happens there?
And notice, there's an S inverse.
We have to be able to invert this eigenvector matrix S.
So for that, we need n independent eigenvectors.
So that's the, that's the case.
OK.
So suppose we have n linearly independent eigenvectors
of A. Put them in the columns of this matrix S.
So I'm naturally going to call that the eigenvector matrix,
because it's got the eigenvectors in its columns.
And all I want to do is show you what happens
when you multiply A times S.
So A times S.
So this is A times the matrix with the first eigenvector
in its first column, the second eigenvector
in its second column, the n-th eigenvector in its n-th column.
And how I going to do this matrix multiplication?
Well, certainly I'll do it a column at a time.
And what do I get.
A times the first column gives me the first column
of the answer, but what is it?
That's an eigenvector.
A times x1 is equal to the lambda times the x1.
And that lambda's we're -- we'll call lambda one,
of course.
So that's the first column.
Ax1 is the same as lambda one x1.
A x2 is lambda two x2.
So on, along to in the n-th column we now how lambda n xn.
Looking good, but the next step is even
better.
So for the next step, I want to separate out
those eigenvalues, those, those multiplying numbers,
from the x-s.
So then I'll have just what I want.
OK.
So how, how I going to separate out?
So that, that number lambda one is
multiplying the first column.
So if I want to factor it out of the first column,
I better put --
here is going to be x1, and that's
going to multiply this matrix lambda
one in the first entry and all zeros.
Do you see that that, that's going to come out
right for the first column?
Because w- we remember how -- how we're going back to that
original punchline.
That if I want a number to multiply x1 then
I can do it by putting x1 in that column,
in the first column, and putting that number there.
Th- u- what I going to have here?
I'm going to have lambda --
I'm going to have x1, x2, ...
,xn.
These are going to be my columns again.
I'm getting S back again.
But now what's it multiplied by, on the right it's
multiplied by?
If I want lambda n xn in the last column, how do I do it?
Well, the last column here will be --
I'll take the last column, use these coefficients,
put the lambda n down there, and it
will multiply that n-th column and give me lambda n xn.
There, there you see matrix multiplication just working
for us.
So I started with A S.
I wrote down what it meant, A times each eigenvector.
That gave me lambda time the eigenvector.
And then when I peeled off the lambdas,
they were on the right-hand side, so I've got S, my matrix,
back again.
And this matrix, this diagonal matrix, the eigenvalue matrix,
and I call it capital lambda.
Using capital letters for matrices and lambda
to prompt me that it's, that it's
eigenvalues that are in there.
So you see that the eigenvalues are just
sitting down that diagonal?
If I had a column x2 here, I would want the lambda two
in the two two position, in the diagonal position,
to multiply that x2 and give me the lambda two x2.
That's my formula.
A S is S lambda.
OK.
That's the -- you see, it's just a calculation.
Now -- I mentioned, and I have to mention again,
this business about n independent eigenvectors.
As it stands, this is all fine, whether --
I mean, I could be repeating the same eigenvector, but --
I'm not interested in that.
I want to be able to invert S, and that's where this comes in.
This n independent eigenvectors business
comes in to tell me that that matrix is invertible.
So let me, on the next board, write down what I've got.
A S equals S lambda.
And now I'm, I can multiply on the left by S inverse.
So this is really --
I can do that, provided S is invertible.
Provided my assumption of n independent eigenvectors is
satisfied.
And I mentioned at the end of last time, and I'll say again,
that there's a small number of matrices for --
that don't have n independent eigenvectors.
So I've got to discuss that, that technical point.
But the great -- the most matrices that we see have n di-
n independent eigenvectors, and we can diagonalize.
This is diagonalization.
I could also write it, and I often will,
the other way round.
If I multiply on the right by S inverse,
if I took this equation at the top and multiplied on the right
by S inverse, I could --
I would have A left here.
Now S inverse is coming from the right.
So can you keep those two straight?
A multiplies its eigenvectors, that's how I keep them
straight.
So A multiplies S.
A multiplies S.
And then this S inverse makes the whole thing diagonal.
And this is another way of saying the same thing,
putting the Ss on the other side of the equation.
A is S lambda S inverse.
So that's the, that's the new factorization.
That's the replacement for L U from elimination or Q R for --
from Gram-Schmidt.
And notice that the matrix -- so it's, it's a matrix times
a diagonal matrix times the inverse of the first one.
It's, that's the combination that we'll
see throughout this chapter.
This combination with an S and an S inverse.
OK.
Can I just begin to use that?
For example, what about A squared?
What are the eigenvalues and eigenvectors of A squared?
That's a straightforward question with a,
with an absolutely clean answer.
So let me, let me consider A squared.
So I start with A x equal lambda x.
And I'm headed for A squared.
So let me multiply both sides by A.
That's one way to get A squared on the left.
So -- I should write these if-s in here.
If A x equals lambda x, then I multiply by A,
so I get A squared x equals -- well, I'm multiplying by A,
so that's lambda A x.
That lambda was a number, so I just put it on the left.
And what do I -- tell me how to make that look better.
What have I got here for if, if A
has the eigenvalue lambda and eigenvector
x, what's up with A squared?
A squared x, I just multiplied by A,
but now for Ax I'm going to substitute lambda x.
So I've got lambda squared x.
So from that simple calculation, I --
my conclusion is that the eigenvalues of A squared are
lambda squared.
And the eigenvectors --
I always think about both of
those.
What can I say about the eigenvalues?
They're squared.
What can I say about the eigenvectors?
They're the same.
The same x as in -- as for A.
Now let me see that also from this formula.
How can I see what A squared is looking like from this formula?
So let me -- that was one way to do it.
Let me do it by just taking A squared from that.
A squared is S lambda S inverse -- that's A --
times S lambda S inverse -- that's A, which is?
This is the beauty of eigenvalues, eigenvectors.
Having that S inverse and S is the identity,
so I've got S lambda squared S inverse.
Do you see what that's telling me?
It's, it's telling me the same thing that I just learned here,
but in the -- in a matrix form.
It's telling me that the S is the same,
the eigenvectors are the same, but the eigenvalues
are squared.
Because this is -- what's lambda squared?
That's still diagonal.
It's got little lambda one squared,
lambda two squared, down to lambda n
squared o- on that diagonal.
Those are the eigenvalues, as we just learned, of A squared.
OK.
So -- somehow those eigenvalues and eigenvectors are really
giving you a way to --
see what's going on inside a matrix.
Of course I can continue that for --
to the K-th power, A to the K-th power.
If I multiply, if I have K of these together,
do you see how S inverse S will keep canceling
in the, in the inside?
I'll have the S outside at the far left,
and lambda will be in there K times, and S inverse.
So what's that telling me?
That's telling me that the eigenvalues
of A, of A to the K-th power are the K-th powers.
The eigenvalues of A cubed are the cubes of the eigenvalues of
A. And the eigenvectors are the same, the same.
OK.
In other words, eigenvalues and eigenvectors
give a great way to understand the powers of a matrix.
If I take the square of a matrix,
or the hundredth power of a matrix,
the pivots are all over the place.
L U, if I multiply L U times L U times L U times L U
a hundred times, I've got a hundred L Us.
I can't do anything with them.
But when I multiply S lambda S inverse by itself,
when I look at the eigenvector picture a hundred times,
I get a hundred or ninety-nine of these guys canceling out
inside, and I get A to the hundredth
is S lambda to the hundredth S inverse.
I mean, eigenvalues tell you about powers
of a matrix in a way that we had no way to approach previously.
For example, when does --
when do the powers of a matrix go to zero?
I would call that matrix stable, maybe.
So I could write down a theorem.
I'll write it as a theorem just to use that word
to emphasize that here I'm getting this great fact
from this eigenvalue picture.
OK.
A to the K approaches zero as K goes, as K gets bigger if what?
What's the w- how can I tell, for a matrix A,
if its powers go to zero?
What's -- somewhere inside that matrix is that information.
That information is not present in the pivots.
It's present in the eigenvalues.
What do I need for the -- to know that if I take higher
and higher powers of A, that this matrix gets smaller
and smaller?
Well, S and S inverse are not moving.
So it's this guy that has to get small.
And that's easy to -- to understand.
The requirement is all eigenvalues --
so what is the requirement?
The eigenvalues have to be less than one.
Now I have to wrote that absolute value,
because those eigenvalues could be negative,
they could be complex numbers.
So I'm taking the absolute value.
If all of those are below one.
That's, in fact, we practically see why.
And let me just say that I'm operating on one assumption
here, and I got to keep remembering
that that assumption is still present.
That assumption was that I had a full set of,
of n independent eigenvectors.
If I don't have that, then this approach is not working.
So again, a pure eigenvalue approach, eigenvector approach,
needs n independent eigenvectors.
If we don't have n independent eigenvectors,
we can't diagonalize the matrix.
We can't get to a diagonal matrix.
This diagonalization is only possible
if S inverse makes sense.
OK.
Can I, can I follow up on that point now?
So you see why -- what we get and, and why we want it,
because we get information about the powers of a matrix just
immediately from the eigenvalues.
OK.
Now let me follow up on this, business of which matrices
are diagonalizable.
Sorry about that long word.
So a matrix is, is sure -- so here's, here's the main point.
A is sure to be --
to have N independent eigenvectors and, and be --
now here comes that word -- diagonalizable if, if --
so we might as well get the nice case out in the open.
The nice case is when -- if all the lambdas are different.
That means, that means no repeated eigenvalues.
OK.
That's the nice case.
If my matrix, and most -- if I do a random matrix in Matlab
and compute its eigenvalues --
so if I computed if I took eig of rand of ten ten, gave,
gave that Matlab command, the --
we'd get a random ten by ten matrix,
we would get a list of its ten eigenvalues,
and they would be different.
They would be distinct is the best word.
I would have -- a random matrix will have ten distinct --
a ten by ten matrix will have ten distinct eigenvalues.
And if it does, the eigenvectors are automatically independent.
So that's a nice fact.
I'll refer you to the text for the proof.
That, that A is sure to have n independent eigenvectors
if the eigenvalues are different, if.
If all the, if all eigenvalues are different.
It's just if some lambdas are repeated,
then I have to look more closely.
If an eigenvalue is repeated, I have to look, I have to count,
I have to check.
Has it got -- say it's repeated three times.
So what's a possibility for the --
so here is the, here is the repeated possibility.
And, and let me emphasize the conclusion.
That if I have repeated eigenvalues, I may or may not,
I may or may not have, have n independent eigenvectors.
I might.
I, I, you know, this isn't a completely negative case.
The identity matrix --
suppose I take the ten by ten identity matrix.
What are the eigenvalues of that matrix?
So just, just take the easiest matrix, the identity.
If I look for its eigenvalues, they're all ones.
So that eigenvalue one is repeated ten times.
But there's no shortage of eigenvectors for the identity
matrix.
In fact, every vector is an eigenvector.
So I can take ten independent vectors.
Oh, well, what happens to everything --
if A is the identity matrix, let's
just think that one through in our head.
If A is the identity matrix, then it's
got plenty of eigenvectors.
I choose ten independent vectors.
They're the columns of S.
And, and what do I get from S inverse A S?
I get I again, right?
If A is the identity -- and of course that's the correct
lambda.
The matrix was already diagonal.
So if the matrix is already diagonal,
then the, the lambda is the same as the matrix.
A diagonal matrix has got its eigenvalues
sitting right there in front of you.
Now if it's triangular, the eigenvalues
are still sitting there, but so let's
take a case where it's triangular.
Suppose A is like, two one two zero.
So there's a case that's going to be trouble.
There's a case that's going to be trouble.
First of all, what are the --
I mean, we just --
if we start with a matrix, the first thing
we do, practically without thinking
is compute the eigenvalues and eigenvectors.
OK.
So what are the eigenvalues?
You can tell me right away what they are.
They're two and two, right.
It's a triangular matrix, so when I do this determinant,
shall I do this determinant of A minus lambda I?
I'll get this two minus lambda one zero two minus lambda,
right?
I take that determinant, so I make those into vertical bars
to mean determinant.
And what's the determinant?
It's two minus lambda squared.
What are the roots?
Lambda equal two twice.
So the eigenvalues are lambda equals two and two.
OK, fine.
Now the next step, find the eigenvectors.
So I look for eigenvectors, and what do I find for this guy?
Eigenvectors for this guy, when I
subtract two minus the identity, so A minus two
I has zeros here.
And I'm looking for the null space.
What's, what are the eigenvectors?
They're the -- the null space of A minus lambda I.
The null space is only one dimensional.
This is a case where I don't have enough eigenvectors.
My algebraic multiplicity is two.
I would say, when I see, when I count
how often the eigenvalue is repeated,
that's the algebraic multiplicity.
That's the multiplicity, how many times
is it the root of the polynomial?
My polynomial is two minus lambda squared.
It's a double root.
So my algebraic multiplicity is two.
But the geometric multiplicity, which looks for vectors,
looks for eigenvectors, and -- which means the null space
of this thing, and the only eigenvector is one
zero.
That's in the null space.
Zero one is not in the null space.
The null space is only one dimensional.
So there's a matrix, my -- this A or the original A,
that are not diagonalizable.
I can't find two independent eigenvectors.
There's only one.
OK.
So that's the case that I'm --
that's a case that I'm not really handling.
For example, when I wrote down up here
that the powers went to zero if the eigenvalues were below one,
I didn't really handle that case of repeated eigenvalues,
because my reasoning was based on this formula.
And this formula is based on n independent eigenvectors.
OK.
Just to say then, there are some matrices that we're, that,
that we don't cover through diagonalization,
but the great majority we do.
OK.
And we, we're always OK if we have
different distinct eigenvalues.
OK, that's the, like, the typical case.
Because for each eigenvalue there's
at least one eigenvector.
The algebraic multiplicity here is one for every eigenvalue
and the geometric multiplicity is one.
There's one eigenvector.
And they are independent.
OK.
Now let me come back to the important case, when,
when we're OK.
The important case, when we are diagonalizable.
Let me, look at --
so -- let me solve this equation.
The equation will be each --
I start with some -- start with a given vector u0.
And then my equation is at every step,
I multiply what I have by A.
That, that equation ought to be simple to handle.
And I'd like to be able to solve it.
How would I find -- if I start with a vector u0 and I multiply
by A a hundred times, what have I got?
Well, I could certainly write down a formula for the answer,
so what, what -- so u1 is A u0.
And u2 is -- what's u2 then?
u2, I multiply -- u2 I get from u1 by another multiplying by A,
so I've got A twice.
And my formula is uk, after k steps,
I've multiplied by A k times the original u0.
You see what I'm doing?
The next section is going to solve systems
of differential equations.
I'm going to have derivatives.
This section is the nice one.
It solves difference equations.
I would call that a difference equation.
It's -- at first order, I would call that a first-order system,
because it connects only -- it only goes up one level.
And I -- it's a system because these are vectors
and that's a matrix.
And the solution is just that.
OK.
But, that's a nice formula.
That's the, like, the most compact formula
I could ever get. u100 would be A to the one hundred u0.
But how would I actually find u100?
How would I find -- how would I discover what u100 is?
Let me, let me show you how.
Here's the idea.
If -- so to solve, to really solve -- shall I say,
to really solve --
to really solve it, I would take this initial vector u0
and I would write it as a combination of eigenvectors.
To really solve, write u nought as a combination,
say certain amount of the first eigenvector
plus a certain amount of the second eigenvector
plus a certain amount of the last eigenvector.
Now multiply by A.
You want to -- you got to see the magic of eigenvectors
working here.
Multiply by A.
So Au0 is what?
So A times that.
A times -- so what's A --
I can separate it out into n separate pieces,
and that's the whole point.
That each of those pieces is going in its own merry way.
Each of those pieces is an eigenvector,
and when I multiply by A, what does this piece become?
So that's some amount of the first --
let's suppose the eigenvectors are normalized to be unit
vectors.
So that says what the eigenvector is.
It's a --
And I need some multiple of it to produce u0.
OK.
Now when I multiply by A, what do I get?
I get c1, which is just a factor, times Ax1,
but Ax1 is lambda one x1.
When I multiply this by A, I get c2 lambda two x2.
And here I get cn lambda n xn.
And suppose I multiply by A to the hundredth power now.
Can we, having done it, multiplied by A, let's
multiply by A to the hundredth.
What happens to this first term when I multiply by A to the one
hundredth?
It's got that factor lambda to the hundredth.
That's the key.
That -- that's what I mean by going its own merry way.
It, it is pure eigenvector.
It's exactly in a direction where multiplication by A
just brings in a scalar factor, lambda one.
So a hundred times brings in this a hundred times.
Hundred times lambda two, hundred times lambda n.
Actually, we're -- what are we seeing here?
We're seeing, this same, lambda capital
lambda to the hundredth as in the, as in the diagonalization.
And we're seeing the S matrix, the,
the matrix S of eigenvectors.
That's what this has got to -- this has got to amount to.
A lambda to the hundredth power times an S times this vector c
that's telling us how much of each one
is in the original thing.
So if, if I had to really find the hundredth power,
I would take u0, I would expand it as a combination
of eigenvectors -- this is really S,
the eigenvector matrix, times c, the, the coefficient vector.
And then I would immediately then,
by inserting these hundredth powers of eigenvalues,
I'd have the answer.
So -- huh, there must be --
oh, let's see, OK.
It's -- so, yeah.
So if u100 is A to the hundredth times u0, and u0 is S c --
then you see this formula is just this formula,
which is the way I would actually get hold of this,
of this u100, which is --
let me put it here.
u100.
The way I would actually get hold of that, see what,
what the solution is after a hundred steps, would be --
expand the initial vector into eigenvectors and let each
eigenvector go its own way, multiplying by a hundred at --
by lambda at every step, and therefore by lambda
to the hundredth power after a hundred steps.
Can I do an example?
So that's the formulas.
Now let me take an example.
I'll use the Fibonacci sequence as an example.
So, so Fibonacci example.
You remember the Fibonacci numbers?
If we start with one and one as F0 -- oh,
I think I start with zero, maybe.
Let zero and one be the first ones.
So there's F0 and F1, the first two Fibonacci numbers.
Then what's the rule for Fibonacci numbers?
Ah, they're the sum.
The next one is the sum of those, so it's one.
The next one is the sum of those, so it's two.
The next one is the sum of those, so it's three.
Well, it looks like one two three four five,
but somehow it's not going to do that way.
The next one is five, right.
Two and three makes five.
The next one is eight.
The next one is thirteen.
And the one hundredth Fibonacci number is what?
That's my question.
How could I get a formula for the hundredth number?
And, for example, how could I answer the question,
how fast are they growing?
How fast are those Fibonacci numbers growing?
They're certainly growing.
It's not a stable case.
Whatever the eigenvalues of whatever matrix it is,
they're not smaller than one.
These numbers are growing.
But how fast are they growing?
The answer lies in the eigenvalue.
So I've got to find the matrix, so let me write down
the Fibonacci rule.
F(k+2) = F(k+1)+F k, right?
Now that's not in my --
I want to write that as uk plus one and Auk.
But right now what I've got is a single equation, not a system,
and it's second-order.
It's like having a second-order differential equation
with second derivatives.
I want to get first derivatives.
Here I want to get first differences.
So the way, the way to do it is to introduce uk will be
a vector --
see, a small trick.
Let uk be a vector, F(k+1) and Fk.
So I'm going to get a two by two system, first order,
instead of a one -- instead of a scalar system, second order,
by a simple trick.
I'm just going to add in an equation F(k+1) equals F(k+1).
That will be my second equation.
Then this is my system, this is my unknown,
and what's my one step equation?
So, so now u(k+1), that's -- so u(k+1) is the left side,
and what have I got here on the right side?
I've got some matrix multiplying uk.
Can you, do -- can you see that all right?
if you can see it, then you can tell me what the matrix is.
Do you see that I'm taking my system here.
I artificially made it into a system.
I artificially made the unknown into a vector.
And now I'm ready to look at and see what the matrix
is.
So do you see the left side, u(k+1) is F(k+2) F(k+1),
that's just what I want.
On the right side, this remember, this uk here --
let me for the moment put it as F(k+1) Fk.
So what's the matrix?
Well, that has a one and a one, and that has a one and a zero.
There's the matrix.
Do you see that that gives me the right-hand side?
So there's the matrix A.
And this is our friend uk.
So we've got -- so that simple trick --
changed the second-order scalar problem
to a first-order system.
Two b- u- with two unknowns.
With a matrix.
And now what do I do?
Well, before I even think, I find its eigenvalues
and eigenvectors.
So what are the eigenvalues and eigenvectors of that matrix?
Let's see.
I always -- first let me just, like, think for a minute.
It's two by two, so this shouldn't be impossible to do.
Let's do it.
OK.
So my matrix, again, is one one one zero.
It's symmetric, by the way.
So what I will eventually know about symmetric matrices
is that the eigenvalues will come out real.
I won't get any complex numbers here.
And the eigenvectors, once I get those,
actually will be orthogonal.
But two by two, I'm more interested in what
the actual numbers are.
What do I know about the two numbers?
Well, should do you want me to find
this determinant of A minus
lambda I?
Sure.
So it's the determinant of one minus lambda one one zero,
right?
Minus lambda, yes.
God.
OK.
There'll be two eigenvalues.
What will -- tell me again what I know about the two
eigenvalues before I go any further.
Tell me something about these two eigenvalues.
What do they add up to?
Lambda one plus lambda two is?
Is the same as the trace down the diagonal of the matrix.
One and zero is one.
So lambda one plus lambda two should come out to be one.
And lambda one times lambda one times lambda two
should come out to be the determinant, which
is minus one.
So I'm expecting the eigenvalues to add to one
and to multiply to minus one.
But let's just see it happen here.
If I multiply this out, I get -- that times that'll be a lambda
squared minus lambda minus one.
Good.
Lambda squared minus lambda minus one.
Actually, I -- you see the b- compare that with the original
equation that I started with.
F(k+2) - F(k+1)-Fk is zero.
The recursion that -- that the Fibonacci numbers satisfy is
somehow showing up directly here for the eigenvalues when we set
that to zero.
WK.
Let's solve.
Well, I would like to be able to factor that, that quadratic,
but I'm better off to use the quadratic formula.
Lambda is -- let's see.
Minus b is one plus or minus the square root of b squared,
which is one, minus four times that times that,
which is plus four, over two.
So that's the square root of five.
So the eigenvalues are lambda one is one half of one
plus square root of five, and lambda two is one half of one
minus square root of five.
And sure enough, they -- those add up to one and they multiply
to give minus one.
OK.
Those are the two eigenvalues.
How -- what are those numbers approximately?
Square root of five, well, it's more than two
but less than three.
Hmm.
It'd be nice to know these numbers.
I think, I think that -- so that number comes out bigger than
one, right?
That's right.
This number comes out bigger than one.
It's about one point six one eight or something.
Not exactly, but.
And suppose it's one point six.
Just, like, I think so.
Then what's lambda two?
Is, is lambda two positive or negative?
Negative, right, because I'm -- it's, obviously negative,
and I knew that the -- so it's minus --
and they add up to one, so minus point six one eight, I guess.
OK.
A- and some more.
Those are the two eigenvalues.
One eigenvalue bigger than one, one eigenvalue smaller than
one.
Actually, that's a great situation to be in.
Of course, the eigenvalues are different,
so there's no doubt whatever -- is this matrix diagonalizable?
Is this matrix diagonalizable, that original matrix A?
Sure.
We've got two distinct eigenvalues
and we can find the eigenvectors in a moment.
But they'll be independent, we'll be diagonalizable.
And now, you, you can already answer my very first question.
How fast are those Fibonacci numbers increasing?
How -- those -- they're increasing,
right?
They're not doubling at every step.
Let me -- let's look again at these numbers.
Five, eight, thirteen, it's not obvious.
The next one would be twenty-one, thirty-four.
So to get some idea of what F one hundred is,
can you give me any --
I mean the crucial number --
so it -- these -- it's approximately --
what's controlling the growth of these Fibonacci numbers?
It's the eigenvalues.
And which eigenvalue is controlling that growth?
The big one.
So F100 will be approximately some constant, c1 I guess,
times this lambda one, this one plus square root of five
over two, to the hundredth power.
And the two hundredth F -- in other words, the eigenvalue --
the Fibonacci numbers are growing by about that factor.
Do you see that we, we've got precise information about the,
about the Fibonacci numbers out of the eigenvalues?
OK.
And again, why is that true?
Let me go over to this board and s- show what I'm doing here.
The -- the original initial value is some combination
of eigenvectors.
And then when we start -- when we start going out the theories
of Fibonacci numbers, when we start multiplying by A
a hundred times, it's this lambda one to the hundredth.
This term is, is the one that's taking over.
It's -- I mean, that's big, like one point six to the hundredth
power.
The second term is practically nothing, right?
The point six, or minus point six, to the hundredth power
is an extremely small, extremely small number.
So this is -- there're only two terms,
because we're two by two.
This number is -- this piece of it is there,
but it's, it's disappearing, where this piece is there
and it's growing and controlling everything.
So, so really the -- we're doing, like,
problems that are evolving.
We're doing dynamic u- instead of Ax=b,
that's a static problem.
We're now we're doing dynamics.
A, A squared, A cubed, things are evolving in
time.
And the eigenvalues are the crucial, numbers.
OK.
I guess to complete this, I better
write down the eigenvectors.
So we should complete the, the whole process
by finding the eigenvectors.
OK, well, I have to -- up in the corner, then,
I have to look at A minus lambda I.
So A minus lambda I is this one minus lambda one one and minus
lambda.
And now can we spot an eigenvector out of that?
That's, that's, for these two lambdas,
this matrix is singular.
I guess the eigenvector -- two by two ought to be, I mean,
easy.
So if I know that this matrix is singular,
then u- seems to me the eigenvector
has to be lambda and one, because that multiplication
will give me the zero.
And this multiplication gives me -- better give me also zero.
Do you see why it does?
This is the minus lambda squared plus lambda plus one.
It's the thing that's zero because these lambdas are
special.
There's the eigenvector.
x1 is lambda one one, and x2 is lambda two one.
I did that as a little trick that was available in the two
by two case.
So now I finally have to --
oh, I have to take the initial u0 now.
So to complete this example entirely,
I have to say, OK, what was u0?
u0 was F1 F0.
So u0, the starting vector is F1 F0, and those were one and
zero.
So I have to use that vector.
So I have to look for, for a multiple
of the first eigenvector and the second to produce u0,
the one zero
vector.
This is what will find c1 and c2, and then I'm done.
Do you -- so let me instead of, in the last five seconds,
grinding out a formula, let me repeat the idea.
Because I'd really -- it's the idea that's central.
When things are evolving in time --
let me come back to this board, because the ideas are here.
When things are evolving in time by a first-order system,
starting from an original u0, the key
is find the eigenvalues and eigenvectors of A.
That will tell -- those eigenvectors --
the eigenvalues will already tell you what's happening.
Is the solution blowing up, is it
going to zero, what's it doing.
And then to, to find out exactly a formula,
you have to take your u0 and write it
as a combination of eigenvectors and then
follow each eigenvector separately.
And that's really what this formula, the formula for, --
that's what the formula for A to the K is doing.
So remember that formula for A to the K
is S lambda to the K S inverse.
OK.
That's, that's difference equations.
And you just have to -- so the, the homework will give some
examples, different from Fibonacci, to follow through.
And next time will be differential equations.
Thanks.